If you've been following my blog (I don't post often do I don't blame you if you don't ) you know that I've become a pretty big fan of Apple. Even though you do end up paying a slight premium for Apple hardware compared to a Dell let's say, the peace of mind from using OS X and the bundled software is well worth the extra cost.
I only have three complains about my MacBook Pro 4,1 (early 2008 model): A small and very bright white dot on the screen that only appears when displaying white pixels, small amounts of corrosion on the hand rest area near the trackpad (aluminum pitting), and finally the latch button to pop up the display has been stuck pressed in for the past two days and so the screen won't stay close properly.
Turns out that there isn't much I can do about the first problem; many other owners of MacBook models with LED-backlit screens also seem to have the same problem. The second is slightly annoying, but rather harmless... I doubt my sweat will be able to react all the way through the aluminum casing. However, the last one also seems to be a relatively common problem, and fortunately it's easy to fix! After two hours of fidgeting with a paperclip and protractor trying to push the latch forward, I finally decided to shine a flashlight into the small holes near the trackpad and latch mechanism. Sure enough, there was a small piece of plastic that had fallen into the hole and was blocking the latch from springing forward. I used a small metal hook to carefully move the piece of plastic upwards and not slide it ;across ;(where it would eventually just obstruct the latch again) and then removed it. Voila, the latch was working again!